|
|
Crown XLS602 2 x 370W Amplifier
SKU
CRXLS602
.jpg)
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series.
They are a powerful argument for quality and value!
Reliable design incorporates many popular features.
- Housed in a rugged, all-steel 2U chassis.
- Efficient forced-air fan prevents excessive thermal buildup.
- Electronically balanced XLR inputs and touch-proof binding post outputs and two Speakon outputs.
- Features precision detented level controls, power switch, and four LEDs, which indicate clip for each channel, power and fault conditions.
Technical Specifications:
- Sensitivity (volts RMS) for full rated power at 4 ohms: XLS-602: 1.26
- Frequency Response (at 1 watt): 20 Hz to 20 kHz: 0.75 dB.
- Phase Response (degrees at 1 watt):
- Signal-to-Noise Ratio (20 Hz to 20 kHz):
- A-weighted, below rated power: > 100 dB.
- No weighting, below rated power: > 95 dB.
- Total Harmonic Distortion (THD) at full bandwidth power: 20 Hz to 1 kHz < 0.5%
- Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1): from full rated output to 40 dB < 0.3%.
- Damping Factor (8 ohm): 10 Hz to 400 Hz: >200.
- Crosstalk (below rated power):
- Voltage Gain (at maximum output): 31 dB
Power:
- Load Impedance: Safe with all types of loads: Rated for 2 to 8 ohms in Stereo, 8 ohms in Bridge-Mono
- AC Line Voltages Available (10%): 120VAC, 60 Hz and 230VAC, 50 Hz
Controls:
- Level: Two front-panel, black rotary level controls, one for each channel
- Power: Front-panel switch; on when in the UP position
- Circuit Breaker: Provides overload protection
Indicators:
- Clip: Two front-panel red LEDs, one for each channel, illuminate when the channels output signal is being overdriven
- Power: Green front-panel LED indicates amplifier has been turned on and AC power is available
- Fault: Yellow front-panel LED illuminates when amplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on
Input/Output:
- Input Connectors: One per channel; back-panel three-pin female XLR input connectors
- Input Impedance (nominally balanced, nominally unbalanced): 20 k ohms, 10 k ohms
- Output Connectors: Two 4-pole Speakon connectors (one per channel) and two pairs of 5-way binding posts; accepts banana plugs, spade lugs or bare wire. (European models do not accept banana plugs.)
- DC Output Offset (shorted input): 10 millivolts
- Output Signal: Stereo, unbalanced, two-channel
- Protection: XLS Series amplifiers provide extensive protection, including output current limiting, DC protection, circuit breaker, and special thermal protection for the units transformers.
Construction:
- Ventilation: Flow-through ventilation from front to back.
- Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
- Air Volume Requirements (per minute per unit): 80.15 ft (2.27 m).
- Dimensions: EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height and 14-inch (35.6-cm) depth behind the mounting surface.
Weight:
- Net Weight: 27.2 lbs. (12.3 kg)
- Shipping Weight: 32.2 lbs. (14.6 kg)
1 year limited guarantee
For more info on this product please click here
|
|